Computational fluid dynamic simulations of image-based stented coronary bifurcation models

One of the relevant phenomenon associated with in-stent restenosis in coronary arteries is an altered haemodynamics in the stented region. Computational fluid dynamics (CFD) offers the possibility to investigate the haemodynamics at a level of detail not always accessible within experimental techniques. CFD can quantify and correlate the local haemodynamics structures which might lead to in-stent restenosis. The aim of this work is to study the fluid dynamics of realistic stented coronary artery models which replicate the complete clinical procedure of stent implantation. Two cases of pathologic left anterior descending coronary arteries with their bifurcations are reconstructed from computed tomography angiography and conventional coronary angiography images. Results of wall shear stress and relative residence time show that the wall regions more prone to the risk of restenosis are located next to stent struts, to the bifurcations and to the stent overlapping zone for both investigated cases. Considering a bulk flow analysis, helical flow structures are generated by the curvature of the zone upstream from the stent and by the bifurcation regions. Helical recirculating microstructures are also visible downstream from the stent struts. This study demonstrates the feasibility to virtually investigate the haemodynamics of patient-specific coronary bifurcation geometries.     

Weak mismatch epitaxy and structural Feedback in graphene growth on copper foil

Graphene growth by low-pressure chemical vapor deposition on low cost copper foils shows great promise for large scale applications. It is known that the local crystallography of the foil influences the graphene growth rate. Here we find an epitaxial relationship between graphene and copper foil. Interfacial restructuring between graphene and copper drives the formation of (n10) facets on what is otherwise a mostly Cu(100) surface, and the facets in turn influence the graphene orientations from the onset of growth. Angle resolved photoemission shows that the electronic structure of the graphene is decoupled from the copper indicating a weak interaction between them. Despite this, two preferred orientations of graphene are found, ±8° from the Cu[010] direction, creating a non-uniform distribution of graphene grain boundary misorientation angles. Comparison with the model system of graphene growth on single crystal Cu(110) indicates that this orientational alignment is due to mismatch epitaxy. Despite the differences in symmetry the orientation of the graphene is defined by that of the copper. We expect these observations to not only have importance for controlling and understanding the growth process for graphene on copper, but also to have wider implications for the growth of two-dimensional materials on low cost metal substrates.      

Microstructural Study of the Intermetallic Bonding Between AI Foam and Low Carbon Steel

Bonding between a metal foam core and a metallic skin is a pre requisite for the technological application of aluminum foam as filling reinforcement material to improve energy absorption and vibration damping of hollow components. This work is a preliminary study for the microstructural characterization of the interface layer formed between a commercial powder metallurgy （PM） precursor and a steel mould during foaming. The microstructure of the intermetallic layer was characterized by scanning electron microscopy, electron probe microanalysis and nanohardness measurements on the cross section. X-ray diffraction measurements, performed on the foam/substrate surface after stepwise material removal, allow the identification of the intermetallic phases. Two intermetallic layers, identified as Fe2Als and FeAI3, characterize the low Si foam/substrate while the AISiI0 foam/substrate interface evidences the presence of three Fe（Si, AI） intermetallic layers with different composition. Two and three different phases of increasing hardness could be distinguished going from the foam to the steel substrate for AIMglSi0.6 and AISiI0 precursors respectively. The results suggest the importance of elemental diffusion from steel substrate in the molten aluminum matrix （foam）. The possibility to control and tailor the microstructural properties of the interface between foam and steel skin is of fundamental importance in the technological process of foam filled structures manufacturing.     

Progress in control and data acquisition for the ITER neutral beam test facility

SPIDER, the ion source test bed in the ITER neutral beam test facility, is under construction and its operation is expected to start in 2014. Control and data acquisition for SPIDER are undergoing final design. SPIDER CODAS, as the control and data acquisition system is referred to, is requested to manage 25 plant units, to acquire 1000 analogue signals with sampling rates ranging from a few S/s to 10 MS/s, to acquire images with up to 100 frames per second, to operate with long pulses lasting up to 1 h, and to sustain 200 MB/s data throughput into the data archive with an annual data storage amount of up to 50 TB. SPIDER CODAS software architecture integrates three open-source software frameworks each addressing specific system requirements. Slow control exploits the synergy among EPICS and Siemens S7 programmable controllers. Data handling is by MDSplus a data-centric framework that is geared towards the collection and organization of scientific data. Diagnostics based on imaging drive the design of data throughput and archive size. Fast control is implemented by using MARTe, a data-driven, object-oriented, real-time environment. The paper will describe in detail the progress of the system hardware and software architecture and will show how the software frameworks interact to provide the functions requested by SPIDER CODAS. The paper will focus on how the performance requirements can be met with the described SPIDER CODAS architecture, describing the progress achieved by carrying out prototyping activities.     

Heat Transfer in Water-Based SiC and TiO2 Nanofluids

The article reports the results of heat transfer experimental tests on water-based TiO₂ (9 wt%) and SiC (3, 6, 9 wt%) nanofluids. Measurements were performed in a two-loop test rig for immediate comparison of the thermal performances of the nanofluid with the base fluid. The convective heat transfer is evaluated in a circular pipe heated with uniform heat flux (from 20 to 240 kW/m²) and flow regimes from laminar to turbulent. Tests have been performed to compare the heat transfer of nanofluids and water at the same velocity (from 0.7 to 1.6 m/s) or Reynolds number (from 300 to 6000), and they have also been compared with values calculated from some of the most widely used correlations. The analysis of the experimental data shows a strong dependence on the parameter used, while both the nanofluid and water data have the same agreement with the calculated values. Nanofluids were manufactured through a two-step procedure: laser synthesis of nanoparticles followed by dispersion in water.     

Energy saving in existing buildings by an intelligent use of interoperable ICTs

In this paper, we report a methodology, developed in the context of Smart Energy Efficient Middleware for Public Spaces European Project, aimed at exploiting ICT monitoring and control services to reduce energy usage and CO₂ footprint in existing buildings. The approach does not require significant construction work as it is based on commercial-off-the-shelf devices and, where present, it exploits and integrates existing building management systems with new sensors and actuator networks. To make this possible, the proposed approach leverages upon the following main contributions: (a) to develop an integrated building automation and control system, (b) to implement a middleware for the energy-efficient buildings domain, (c) to provide a multi-dimensional building information modelling-based visualisation, and (d) to raise people’s awareness about energy efficiency. The research approach adopted in the project started with the selection, as case studies, of representative test and reference rooms in modern and historical buildings chosen for having different requirements and constraints in term of sensing and control technologies. Then, according to the features of the selected rooms, the strategies to reduce the energy consumptions were defined, taking into account the potential savings related to lighting, heating, ventilation, and air conditioning (HVAC) systems and other device loads (PC, printers, etc.). The strategies include both the control of building services and devices and the monitoring of environmental conditions and energy consumption. In the paper, the energy savings estimated through simulation, for both HVAC and lighting, are presented to highlight the potential of the designed system. After the implementation of the system in the demonstrator, results will be compared with the monitored data.